Smart-S30UV大流量低有机物型超纯水机

【简单介绍】

品牌 金畔 产地 国产
水源 市政

Smart-S30UV大流量低有机物型超纯水机是高级别实验室用纯水的优越选择,以自来水为水源,方便快速的制造超纯水,每小时产水量30L,电阻率达到18.2mΩ.cm,标配快插式外接设备供水口,系统可升级.
多种规格储水桶可选,兼容压力水桶和液位水箱2 种纯水储存方式,满足不同水量及应用需求.
模块化设计,预处理、RO 及后续纯化单元均为独立结构,系统维护、滤芯更换更加便捷.

【详细说明】

Smart-S30UV大流量低有机物型超纯水机

产品简述:

   Smart-S30UV低有机物型超纯水机是高级别实验室用纯水的优越选择,以自来水为水源,方便快速的制造超纯水,每小时产水量30L,电阻率达到18.2mΩ.cm,完全符合GB6682-2008、ASTM、CAP、CLSI、EP和USP制定的I级水质的高标准。

产品参数表:

名称 基础型 除热源型 低有机物型 综合型
产品型号 标准型 Smart-S15 Smart-S15UF Smart-S15UV Smart-S15UVF
大流量型 Smart-S30 Smart-S30UF Smart-S30UV Smart-S30UVF
进水要求* 城市自来水:TDS<200 ppm,5-45℃,1.0-4.0Kgf/cm2 (进水TDS>200ppm时,建议选配外置软化器)
系统流程** PF+AC+RO+DI+TF PF+AC+RO+DI+UF+TF PF+AC+RO+UV+DI+TF PF+AC+RO+UV+DI+UF+TF
UP超纯水指标:  
电阻率 18.2MΩ.cm@25℃
重金属离子 < 0.1 ppb
总有机碳(TOC) *** <10 ppb <3 ppb
细菌 <0.1 cfu/ml
热源(内毒素) N/A <0.001 Eu/ml N/A <0.001 Eu/ml
颗粒物(>0.2μm) <1/ml
核糖核酸酶(RNases) N/A <0.01 ng/ml N/A <0.01 ng/ml
脱氧核糖核酸酶(DNases) N/A <4 pg/μl N/A <4 pg/μl
RO反渗透水指标  
离子截留率 96%-99%(使用新RO膜时)
有机物截留率 >99%,当MW>200道尔顿
颗粒和细菌截留率 >99%
产水量(25℃) **** S15:15升/小时;S30:30升/小时
瞬间出水量 2.0升/分钟(需配压力水桶),(加装UF机型流速会有降低)
出水口 2个:RO反渗透水,UP超纯水
外型尺寸/重量 长×宽×高:41×22×42cm/约20Kg
电源/功率 220V、50Hz/ S15:48W,S30:72W
水质监控 背光式LCD液晶在线式电阻率测定仪 + TDS/电导率测试笔
标准配置 主机(含1套纯化柱)+15升压力水桶+TDS/电导率测试笔+附件包

Smart-S30UV大流量低有机物型超纯水机

产品特点:

  • 国内*一次注塑成型工艺机箱,材质为卫生级PP塑料
  • 所有滤芯内置设计,是目前国内同类型机器中集成和精致的设备,占用小的外部空间
  • 机箱顶盖可快速旋开,实现无需开箱即可快速更换预过滤柱,符合GLP规范
  • 全自动压力传感器和微电脑控制工作,实现自动制造纯水
  • 自来水断水自动停机,停机自动断水,储水桶自动补水,储水桶水满自动停机
  • 全自动RO膜防垢冲洗程序,延长RO膜使用寿命
  • 高亮度背光式LCD在线电阻率测试仪,实时监测DI去离子水/UP超纯水水质
  • 便携式TDS/电导率测试笔,干电池设计,可随时测量自来水和RO水的TDS总固体溶解度、电导率、水温
  • 标配快插式外接设备供水口,系统可升级
  • 多种规格储水桶可选,满足不同水量需求
  • 纯水管路、接头均获NSF认证
  • *的RO膜组件设计,采用美国陶氏DOW进口RO膜片,实现了RO膜的长寿命与高品质水质的结合
  • 全新优化的4柱式超纯化柱组模块,方便维护更换,采用美国陶氏DOW进口核子级树脂,时刻保证*水质
  • 双波长(185nm&254nm)UV紫外灯组件(进口灯管),有效杀菌,降低TOC,增强系统适用范围
  • MWCO5000DUF超滤组件(进口),有效去除热源(内毒素),可用于精密的细胞培养和IVF
  • (0.45+0.1)?m进口PES聚醚砜复合滤膜终端除菌过滤器,保证水质无菌

 常规应用:

  • HPLC、GC-MS、ICP-AES
  • ICP-MS、AAS、GF-AAS
  • TOC分析、IC
  • 电化学
  • 超痕量和痕量无机、有机物分析
  • 分子生物、微生物学
  • PCR应用及分析
  • DNA序列分析
  • 哺乳动物细胞培养
  • 细胞和培养介质制备
  • 单克隆抗体生产
  • 电泳、凝胶分析

和泰纯水系统耗材:

纯水系统耗材
Edi系列纯水系统耗材
货号 品名 建议更换时间
PC-M-PP 5μm PP深层滤芯 约2-6个月
PC-M-KDF KDF复合滤芯 约1年
PC-M-AC-G 精密活性炭滤芯 约6个月
RO-100GPD 100 GPD RO膜 约1-2年
PTC-SF 软化柱
PTC-EDI10-IP EDI模块 约1-3年
PTC-UPPR-M 超纯化柱(进口树脂) 约1000升纯水/柱
TF-(0.45+0.1)μm-S (0.45+0.1)μm进口PES终端滤器
UF-5000D MWCO5000D UF超滤组件(进口)
UV-(185nm&254nm)-10W-M 双波长(185nm&254nm)UV紫外灯组件(进口)
LAMP-(185nm&254nm)-10W-M 双波长(185&254nm)紫外灯管(进口) 约9000小时
UV-254-10W-M 254nm UV紫外灯组件(进口灯管)
LAMP-254-10W-M 254 nm紫外灯管(进口) 约9000小时
Prima/Master系列纯水系统耗材
货号 品名 建议更换时间
PC-M-PP 5μm PP深层滤芯 约2-6个月
PC-M-KDF KDF复合滤芯 约1年
PC-M-AC-G 精密活性炭滤芯 约6个月
RO-100GPD 100 GPD RO膜 约1-2年
RO-200GPD 200GPD RO膜 约1-2年
PTC-AC-HZB 后置活性炭滤芯 约9000升纯水
PTC-MBR-M 去离子纯化柱(进口树脂) 约1000升纯水/柱
PTC-UPPR-M 超纯化柱(进口树脂) 约1000升纯水/柱
TF-(0.45+0.1)μm-S (0.45+0.1)μm进口PES终端滤器
UF-5000D MWCO5000D UF超滤组件(进口)
UV-(185nm&254nm)-10W-M 双波长(185nm&254nm)UV紫外灯组件(进口)
LAMP-(185nm&254nm)-10W-M 双波长(185&254nm)紫外灯管(进口) 约9000小时
UV-254-10W-M 254nm UV紫外灯组件(进口灯管)
LAMP-254-10W-M 254 nm紫外灯管(进口) 约9000小时
Smart系列纯水系统耗材
货号 品名 建议更换时间
PC-M-PP 5μm PP深层滤芯 约2-6个月
PC-PP-ZK 自康PP滤芯 约2-6个月*
PC-AC-B-ZK 自康活性炭滤芯 约4-6个月*
PTC-AC-HZS 后置活性炭滤芯 约6800升纯水
RO-100GPD 100 GPD RO膜 约1-2年
RO-200GPD 200GPD RO膜 约1-2年
PTC-MBR-K 去离子纯化柱(进口树脂) 约1000升纯水/柱
PTC-UPPR-K 超纯化柱(进口树脂) 约1000升纯水/柱
TF-(0.45+0.1)μm-S (0.45+0.1)μm进口PES终端滤器
UF-5000D MWCO5000D UF超滤组件(进口)
UV-(185nm&254nm)-10W-K 双波长(185nm&254nm)UV紫外灯组件(进口)
LAMP-(185nm&254nm)-10W-K 双波长(185&254nm)紫外灯管(进口) 约9000小时
UV-254-10W-K 254nm UV紫外灯组件(进口灯管)
LAMP-254-10W-K 254 nm紫外灯管(进口) 约9000小时
Medium系列纯水系统耗材
货号 品名 建议更换时间
PC-20PP 20寸 PP滤芯 约2-3个月*
PC-20AC-G 20寸颗粒活性炭滤芯 约2-6个月*
PC-20AC-B 20寸活性炭棒滤芯 约2-6个月*
RO-300GPD 300GPD RO膜 约1-2年*
RO-400GPD 400GPD RO膜 约1-2年*
PTC-AC-HZB 后置活性炭滤芯 约9000升纯水
PTC-MBR-12L 12L去离子纯化柱(进口树脂) 含12升进口精密级树脂,约纯化20000升纯水
PTC-UPPR-12L 12L超纯化柱(进口树脂) 含12升进口核子级树脂,约纯化20000升纯水
PTC-MBR-25L 25L去离子纯化柱(进口树脂) 含25升进口精密级树脂,约纯化40000升纯水
PTC-UPPR-25L 25L超纯化柱(进口树脂) 含25升进口核子级树脂,约纯化40000升纯水
PTC-UPPR-M 超纯化柱(进口树脂)
TF-0.2μm-B 0.2μm进口PES终端滤器
UF-5000D MWCO5000D UF超滤组件(进口)
UV-(185nm&254nm)-10W-M 双波长(185nm&254nm)UV紫外灯组件(进口)
LAMP-(185nm&254nm)-10W-M 双波长(185&254 nm)紫外灯(进口) 约9000小时
Basic系列纯水系统耗材
货号 品名 建议更换时间
PC-10PP 10寸PP滤芯 约2-6个月
PC-10AC-G 10寸颗粒活性炭滤芯 约4-6个月
PC-10AC-B 10寸活性炭棒滤芯 约4-6个月
RO-100GPD 100 GPD RO膜 约1-2年
RO-200GPD 200GPD RO膜 约1-2年
RO-300GPD 300GPD RO膜 约1-2年*
PTC-AC-HZB 后置活性炭滤芯 约9000升纯水
PTC-MBR-DW 精密纯化柱 约1000升纯水/柱
PTC-MBR-7.7L 7.7L去离子纯化柱 约16000升纯水/柱

 

Smart-S15UV实验室低有机物型超纯水机

【简单介绍】

品牌 金畔 产地 国产
水源 市政

Smart-S15UV实验室低有机物型超纯水机,以自来水为水源,方便快速的制造超纯水,每小时产水量15L,电阻率达到18.2mΩ.cm。
便携式TDS/电导率测试笔,干电池设计,可随时测量自来水和RO水的TDS总固体溶解度、电导率、水温.
标配快插式外接设备供水口,系统可升级.
多种规格储水桶可选,兼容压力水桶和液位水箱2 种纯水储存方式,满足不同水量及应用需求.

【详细说明】

Smart-S15UV实验室低有机物型超纯水机

产品简述:

   Smart-S15UV低有机物型超纯水机是高级别实验室用纯水的优越选择,以自来水为水源,方便快速的制造超纯水,每小时产水量15L,电阻率达到18.2mΩ.cm,完全符合GB6682-2008、ASTM、CAP、CLSI、EP和USP制定的I级水质的高标准。

产品参数表:

名称 基础型 除热源型 低有机物型 综合型
产品型号 标准型 Smart-S15 Smart-S15UF Smart-S15UV Smart-S15UVF
大流量型 Smart-S30 Smart-S30UF Smart-S30UV Smart-S30UVF
进水要求* 城市自来水:TDS<200 ppm,5-45℃,1.0-4.0Kgf/cm2 (进水TDS>200ppm时,建议选配外置软化器)
系统流程** PF+AC+RO+DI+TF PF+AC+RO+DI+UF+TF PF+AC+RO+UV+DI+TF PF+AC+RO+UV+DI+UF+TF
UP超纯水指标:  
电阻率 18.2MΩ.cm@25℃
重金属离子 < 0.1 ppb
总有机碳(TOC) *** <10 ppb <3 ppb
细菌 <0.1 cfu/ml
热源(内毒素) N/A <0.001 Eu/ml N/A <0.001 Eu/ml
颗粒物(>0.2μm) <1/ml
核糖核酸酶(RNases) N/A <0.01 ng/ml N/A <0.01 ng/ml
脱氧核糖核酸酶(DNases) N/A <4 pg/μl N/A <4 pg/μl
RO反渗透水指标  
离子截留率 96%-99%(使用新RO膜时)
有机物截留率 >99%,当MW>200道尔顿
颗粒和细菌截留率 >99%
产水量(25℃) **** S15:15升/小时;S30:30升/小时
瞬间出水量 2.0升/分钟(需配压力水桶),(加装UF机型流速会有降低)
出水口 2个:RO反渗透水,UP超纯水
外型尺寸/重量 长×宽×高:41×22×42cm/约20Kg
电源/功率 220V、50Hz/ S15:48W,S30:72W
水质监控 背光式LCD液晶在线式电阻率测定仪 + TDS/电导率测试笔
标准配置 主机(含1套纯化柱)+15升压力水桶+TDS/电导率测试笔+附件包

Smart-S15UV实验室低有机物型超纯水机

 

Edi-S10UV低有机物型超纯水机

【简单介绍】

品牌 金畔 产地 国产
水源 市政

Edi-S10UV低有机物型超纯水机(自来水为水源)采用Ionpure EDI技术及模块,以优化的运行成本为您提供始终如一的5MΩ.cm(25℃)以上,TOC<30ppb的Ⅱ级纯水,以及18.2MΩ.cm(25℃)的超纯水,每天纯水产量可达240升。完全符合Ⅰ级水质标准。

【详细说明】

Edi-S10UV低有机物型超纯水机(自来水为水源)

特点与优势

  • Edi-S10UV采用Ionpure EDI 技术及模块;每天纯水产量可达240 升
  • 全自动微电脑控制系统,多级菜单式操作
  • 超大背光式LCD 液晶屏( 分辨率:240×128,尺寸:106×57mm),全程实时动画式工作模式显示
  • 在线3 路水质监控,实时监测源水/RO 水、RO 水/EDI 纯水、UP 超纯水水质
  • 国内特有超纯水全管路消毒程序,只需加入消毒片,即可启动一键消毒程序,保证取得高质量纯水
  • 国内特有的上班、下班两种工作模式,保证供水量充足
  • 全自动RO 膜防垢冲洗程序,延长RO 膜使用寿命
  • 无水报警,水满报警,源水/RO水、RO水/EDI纯水、超纯水( 参数可随意设定) 超标报警
  • 耗材寿命终结报警,故障自动检测,提供安全保证
  • 超纯水循环系统可自由启动、关闭的,保持系统的低细菌污染水平
  • 工厂、客户二级密码,系统设置均由密码保护,防止未经授权的更改
  • 预处理、RO 膜、UV 灯和超纯化柱的寿命可设定,显示耗材已用和剩余时间,耗材到期更换自动提醒,避免水质下降
  • 特设定时定质取水功能( 定时:1-99min;定质:0.1-18.2MΩ.cm)
  • 自动记录一整年水质资料,整机符合 GLP
  • 多种规格储水桶可选,满足不同水量需求
  • 一体化成型塑料机箱,人体工程学设计,水电分离结构
  • 预处理、RO、EDI 模块、超纯化组件,采用模块式独立结构,系统维护、滤芯更换更加便捷,符合GLP 规范
  • 纯水管路、接头均获NSF 认证
  • *超长寿命复合KDF 预滤柱,可实现1 年不用更换,运行成本降低
  • *的RO 膜组件设计,采用美国陶氏DOW 进口RO 膜片,实现了RO 膜的长寿命与高品质水质的结合
  • 全新可独立拆解的一体化4 柱式超纯化柱组模块,采用美国陶氏DOW 进口核子级树脂,时刻保证*水质
  • 双波长(185nm&254nm)UV 紫外灯组件( 进口灯管),有效杀菌,降低TOC,增强系统适用范围
  • MWCO5000DUF 超滤组件( 进口),有效去除热源( 内毒素)。 

技术参数

名称 基础型 除热源型 低有机物型 综合型
产品型号 Edi-S10 Edi-S10UF Edi-S10UV Edi-S10UVF
进水要求* 城市自来水:TDS<200 ppm,5-45℃,1.0-4.0Kgf/cm2 ( 进水TDS>200ppm 时,建议选配外置软化器)
UP 超纯水指标:  
电阻率 18.2MΩ.cm@25℃
重金属离子 < 0.1 ppb
总有机碳(TOC) *** <10 ppb <3 ppb
细菌 <0.1 cfu/ml
热源( 内毒素) N/A <1/ml N/A <1/ml
颗粒物(>0.2μm) <1/ml
核糖核酸酶(RNases) N/A <0.01 ng/ml N/A <0.01 ng/ml
脱氧核糖核酸酶(DNases) N/A <4 pg/μl N/A <4 pg/μl
EDI 去离子水指标:  
电阻率*** >5MΩ.cm
总有机碳(TOC)*** >99%,当MW>200 道尔顿
硅截留率 >99.9%
产水量(25℃) **** 10 升/ 小时
RO 瞬间出水量 2.0 升/ 分钟( 需配压力水桶)
出水口( 触摸按键) 2 个:EDI 去离子水,UP 超纯水
外形尺寸/ 重量 长× 宽× 高:50×36×54cm/ 约30Kg
电源/ 功率 220V、50Hz/120W
标准配置 主机( 含1 套纯化柱)+15 升压力水桶+ 附件包

Edi-S10UV低有机物型超纯水机(自来水为水源)

常规应用

  • HPLC、GC-MS、ICP-AES
  • 超痕量和痕量无机、有机物分析
  • 哺乳动物细胞培养
  • ICP-MS、AAS、GF-AAS
  • 分子生物、微生物学
  • 细胞和培养介质制备
  • TOC 分析、IC
  • PCR 应用及分析
  • 单克隆抗体生产
  • 电化学
  • DNA 序列分析
  • 电泳、凝胶分析。

氯膦酸盐 SUV PEG 脂质体

氯膦酸盐 SUV PEG 脂质体

¥3,299.00

有货

氯膦酸盐 SUV PEG 脂质体

品牌:Jinpan
CLODRONATE SUV PEG LIPOSOMES

MSDS

质检证书(CoA)

相似产品

货号 (SKU) 包装规格 是否现货 价格 数量
C419508-5ml 5ml 期货 氯膦酸盐 SUV PEG 脂质体  
C419508-10ml 10ml 期货 氯膦酸盐 SUV PEG 脂质体  
C419508-15ml 15ml 期货 氯膦酸盐 SUV PEG 脂质体  
C419508-20ml 20ml 期货 氯膦酸盐 SUV PEG 脂质体  
C419508-30ml 30ml 期货 氯膦酸盐 SUV PEG 脂质体  
C419508-40ml 40ml 期货 氯膦酸盐 SUV PEG 脂质体  
C419508-50ml 50ml 期货 氯膦酸盐 SUV PEG 脂质体  

基本信息

产品名称 氯膦酸盐 SUV PEG 脂质体
英文名称 CLODRONATE SUV PEG LIPOSOMES
运输条件 冰袋运输

一般描述

产品描述

对照脂质体不含氯膦酸盐。它们仅含有 PBS,可用于对照实验,以查明注射氯膦酸盐脂质体后观察到的效果是否仅是由于巨噬细胞耗竭所致。

氯膦酸盐脂质体:人工制备的包裹氯膦酸盐的脂质囊泡的悬浮液。悬浮液中氯膦酸盐的浓度约为5毫克/毫升。氯膦酸盐以 CH2Na2Cl2O6P2·4 H2O 的形式封装在脂质体囊泡中。

到达后,脂质体应储存在 4 – 8 ºC(或 39 – 47 ºF)之间。脂质体悬浮液不应冷冻,也不应暴露在极端高温下。这会导致磷脂双分子层受到干扰,可能导致氯膦酸盐从脂质体中泄漏出来。

PBS 脂质体:包裹 PBS 水溶液的人工制备的脂质囊泡的悬浮液。这些不含氯膦酸盐,可用于对照实验。

荧光 DiI 脂质体:人工制备的脂质囊泡悬浮液,包裹着 PBS 水溶液,用荧光染料 DiI 标记。这些不含氯膦酸盐,可用于研究通过特定给药途径注射的脂质体是否能够到达待研究的巨噬细胞。


储存和使用说明

给药前,先让脂质体达到室温,轻轻摇晃或搅拌混悬液。脂质体往往会在一段时间后沉淀,导致小瓶中分布不均匀。当注射时间过长时,脂质体甚至可能在注射器中沉淀。如果使用同一个注射器注射多只动物,这可能会导致剂量不同。

不鼓励稀释悬浮液,但如有必要,请使用 PBS 或盐水。

我们建议客户在发货后 16 周内使用我们的脂质体制剂。强烈建议不要在到期日之后使用。在这段时间之后,污染的风险会增加,并且可能会发生轻微的功能丧失。


作用机制

巨噬细胞在免疫和非免疫防御机制中发挥重要作用。它们构成了抵御细菌、病毒和其他形式的微生物污染侵入脊椎动物体内的第一道防线。巨噬细胞是大细胞,几乎存在于所有身体组织中,它们可以有不同的形式和名称(例如,枯否细胞、肺泡巨噬细胞、小胶质细胞、破骨细胞、红髓巨噬细胞)。巨噬细胞“清除”,它们摄取和消化所有可能是潜在病原体的外来物质、微生物、癌细胞和细胞碎片。这个过程称为吞噬作用。巨噬细胞进一步调节许多非吞噬细胞的功能,主要是通过介导可溶性分子如细胞因子和趋化因子。它们参与先天免疫。

脂质体是人工制备的球体,由同心磷脂双层组成。当磷脂分散在水中时,亲水性头部将构成脂质体的两个外部部分,而疏水性脂肪酸基团将构成内部部分(见图 1)。水性隔室将双层隔开,亲水性分子可以溶解在其中,从而产生脂质体包裹的分子。氯膦酸盐(二氯亚甲基二膦酸盐或 Cl2MBP)是一种亲水分子,可以封装在磷脂双层中。游离的氯膦酸盐不易穿过细胞膜,并被肾系统从循环中迅速清除(即在几分钟内)。然而,当包裹在脂质体中时,氯膦酸盐脂质体会被巨噬细胞摄取而无法逃脱(见图 2)。磷脂双分子层被溶酶体磷脂酶消化,而氯膦酸盐不被消化并保留在巨噬细胞中。巨噬细胞摄入的磷脂双分子层和脂质体越多,氯膦酸盐就会在巨噬细胞内积累越多。超过一定的细胞内浓度,氯膦酸盐将通过启动其程序性细胞死亡,即细胞凋亡来消除巨噬细胞。

氯膦酸盐 SUV PEG 脂质体
图 1. 氯膦酸盐脂质体的示意图。囊泡由同心磷脂双层组成,由水性隔室隔开。双层由亲水和疏水基团组成。氯膦酸盐(此处以黑色方块表示)溶解在水溶液中并封装在脂质体中。
氯膦酸盐 SUV PEG 脂质体
图 2. 巨噬细胞摄取和消化氯膦酸盐脂质体的示意图。氯膦酸盐脂质体通过内吞作用被巨噬细胞摄取,然后与含有磷脂酶的溶酶体 (L) 融合(箭头)。磷脂酶破坏的磷脂双分子层越多,巨噬细胞内释放的氯膦酸盐(黑色方块)就越多。巨噬细胞最终通过凋亡被杀死。(N = 巨噬细胞核)。

因此,氯膦酸盐脂质体可用于通过消耗巨噬细胞来研究巨噬细胞的功能。例如,它们可以应用于各种自身免疫疾病、移植、神经系统疾病和基因治疗的模型。氯膦酸盐脂质体只有在可以达到的情况下才能消耗巨噬细胞。一些组织可以形成脂质体的屏障。通过选择氯膦酸盐脂质体的正确给药途径,可以耗尽特定器官或组织的巨噬细胞。
PBS 脂质体主要用于对照实验。然而,这些也可以通过饱和来阻止吞噬作用一段时间。因此,PBS 脂质体不代表正常健康、非阻塞、非抑制和非活化巨噬细胞的对照实验。当比较氯膦酸盐脂质体与 PBS 脂质体的效果时,效果可能低于预期。

DESCRIPTION

Control liposomes do not contain clodronate. Containing PBS only, they can be used for control experiments, in order to find out whether the effects observed after injection of clodronate liposomes are due to macrophage depletion exclusively.

Clodronate liposomes: a suspension of artificially prepared lipid vesicles encapsulating clodronate. The concentration of clodronate in the suspension is ca. 5 mg / mL. Clodronate is encapsulated in the liposomal vesicles in the form of CH2Na2Cl2O6P2·4 H2O.

PBS liposomes: a suspension of artificially prepared lipid vesicles encapsulating an aqueous PBS solution. These do not contain clodronate and can be used for control experiments.

Fluorescent DiI Liposomes: a suspension of artificially prepared lipid vesicles encapsulating an aqueous PBS solution, labelled with the fluorochrome DiI. These do not contain clodronate and can be used to investigate whether liposomes injected via a particular administration route are able to reach the macrophages to be studied.

STORAGE AND DIRECTIONS OF USE

Upon arrival, liposomes should be stored between 4 – 8 ºC (or 39 – 47 ºF). The liposomal suspensions should never be frozen, nor be exposed to extreme high temperatures. This can cause disturbances to the phospholipid bilayers, possibly leading to leakage of clodronate out of the liposome.

Before administration, let the liposomes reach room temperature first and gently shake or stir the suspension. Liposomes tend to precipitate after some time, causing an inhomogeneous distribution in the vial. When injection takes too much time, the liposomes may even precipitate in the syringe. If multiple animals are injected using the same syringe, this can cause differential dosing.

Dilution of the suspension is discouraged, but if necessary use PBS or saline.

We advise our customers to use our liposomal formulation within 16 weeks after shipment. Use after the expiry date has occurred is strongly discouraged. After this period the risk of contamination increases, and a slight loss of function could occur.

MECHANISM OF ACTION

Macrophages play an important role in immune and non-immune defence mechanisms. They form a first line of defence against bacterial, viral and other forms of microbiological contamination penetrating into the bodies of vertebrates. Macrophages are large cells, found in almost all bodily tissues where they can have varying forms and names (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages). Macrophages “scavenge”, they ingest and digest all foreign substances, microbes, cancer cells and cellular debris that might be potential pathogens. This process is called phagocytosis. Macrophages further regulate functions of many non-phagocytic cells, mainly through mediation of soluble molecules such as cytokines and chemokines. They are involved in innate immunity, adaptive immunity and can have (anti-) inflammatory effects.

Liposomes are artificially prepared spheres and consist of concentric phospholipid bilayers. When phospholipids are dispersed in water, the hydrophilic heads will make up both outer parts of the liposome, whereas the hydrophobic fatty acid groups will make up the inner part (see figure 1). Aqueous compartments separate the bilayers, and hydrophilic molecules can be dissolved in it, resulting in liposome-encapsulated molecules. Clodronate (dichloromethylene-bisphosphonate or Cl2MBP) is a hydrophilic molecule that can be encapsulated within phospholipid bilayers. Free clodronate does not easily cross cell membranes, and is rapidly cleared (i.e. within minutes) from circulation by the renal system. However, when entrapped in a liposome, the clodronate liposome is ingested by macrophages and cannot escape it (see figure 2). The phospholipid bilayers are digested by lysosomal phospholipases, whereas clodronate is not digested and remains in the macrophage. The more phospholipid bilayers and liposomes are ingested by the macrophage, the more clodronate will accumulate within the macrophage. Exceeding a certain intracellular concentration, clodronate will eliminate the macrophage by initiating its programmed cell death, i.e. apoptosis.

氯膦酸盐 SUV PEG 脂质体

Figure 1. Schematic representation of a clodronate liposome. The vesicle consists of concentric phospholipid bilayers, separated by aqueous compartments. The bilayers consist of a hydrophilic and hydrophobic group. Clodronate (represented here as black squares) are dissolved in the aqueous solution and encapsulated within the liposome.

氯膦酸盐 SUV PEG 脂质体

Figure 2. Schematic representation of clodronate liposome ingestion and digestion by a macrophage. Clodronate liposomes are ingested by the macrophages via endocytosis and then fused with the lysosomes (L) which contain phospholipases (arrowheads). The more phospholipid bilayers are disrupted by the phospholipases, the more clodronate (black squares) is released within the macrophage. Macrophages are ultimately killed through apoptosis. (N = nucleus of macrophage).

Thus, clodronate liposomes can be used to study macrophage functioning by depletion of macrophages. For instance, they can be applied in various models of autoimmune disease, transplantation, neurological disorders and gene therapy. Clodronate liposomes are only able to deplete macrophages if they can be reached. Some tissues can form barriers for the liposomes. By choosing the right administration route of clodronate liposomes, particular organs or tissues can be depleted of macrophages.

PBS liposomes are mostly used for control experiments. However, these too can block phagocytosis by saturation for certain periods of time. PBS liposomes thus do not represent a control experiment with normal healthy, non-blocked, non-suppressed and non-activated macrophages. When comparing effects of clodronate liposomes with PBS liposomes, the effects can therefore be less than expected.

ADMINISTRATION PROTOCOLS

Administration protocols should be chosen carefully and depend on several factors, for instance: the type of macrophage you intend to deplete (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages), the time in which you intend to maintain depletion (e.g. short or long term), the (animal) model, and other experimental factors. In vitro application of clodronate liposomes is possible, albeit that they are specifically suitable to study macrophages in vivo. Below you can see schematic representations of the tissues and macrophages that can be reached through different administration routes. Please note that not all tissues and routes are represented here.

Abbreviations: AL = lung alveoli, BM = bone marrow, BR = brain, BV = blood vessels / circulation, DA = draining area of lymph node, EY = eye, GU = gut / intestines, IV = intravenous delivery, KI = kidney, LI = liver, LN = lymph node, LU = lung, LV = lymph vessels, PE = peritoneal cavity, SP = spleen, SY = synovial cavity in joint, TE = testis, TR = trachea.

氯膦酸盐 SUV PEG 脂质体

In general, it is recommend to inject 100 µL of suspension / 10 grams of animal weight for intravenous injection. Raising the dosage considerably may lead to blockage of capillaries. Intravenous administration of clodronate liposomes will lead to maximum depletion of liver and spleen macrophages in ca. 24 hours. Dependent on the subset of macrophages they will remain depleted for ca. 5 days. After that time, new macrophages will replace the depleted ones: macrophage precursors, monocytes, that are formed in bone marrow and released in circulation will arrive at their destination and further differentiate into mature macrophages. Monocytes,macrophage precursors, can also be depleted. To prevent macrophage repopulation, multiple injections can be administered every 2-3 days to target monocytes. See for instance: Sunderkötter, C., Nikolic, T., Dillon, M. J., Van Rooijen, N., Stehling, M., Drevets, D. A., & Leenen, P. J. (2004). Subpopulations of mouse blood monocytes differ in maturation stage and inflammatory response. The Journal of Immunology, 172(7), 4410-4417.

氯膦酸盐 SUV PEG 脂质体

For intraperitoneal administration, the recommended injection dosis (i.e. 100 µL of suspension / 10 grams of animal weight) can be increased considerably. This route also depletes peritoneal macrophages, but will take longer to deplete macrophages in liver and spleen (ca. 3 days). Depletion is slower and more gradual, since the liposomes have to be carried from the peritoneal cavity to circulation by lymph flow via the thoracic duct, which is a passive form of transport.

氯膦酸盐 SUV PEG 脂质体

Local administration is often required to target macrophages that are difficult to reach, such as macrophages in testis or the phagocytic synovial lining cells.

氯膦酸盐 SUV PEG 脂质体

For depletion of alveolar macrophages, clodronate liposomes can be administered intranasally as well as intratracheally. The difference is that intranasal liposomes may be spoiled in the oesophagus if not administered properly, whereas intratracheal instillation will deliver all liposomes in the lung. Please note that these routes only target alveolar macrophages, and not interstitial macrophages. These can be targeted through depletion of blood monocytes in circulation. See for instance: Huang, L., Nazarova, E. V., Tan, S., Liu, Y., & Russell, D. G. (2018). Growth of Mycobacterium tuberculosis in vivo segregates with host macrophage metabolism and ontogeny. Journalof Experimental Medicine, 215(4), 1135-1152.

氯膦酸盐 SUV PEG 脂质体

For subcutaneous injection the maximum volume to be injected depends on the storage capacity of the injection site.

RESULTS

Sections of mouse liver, stained with monoclonal antibody F4/80 Normal liver with positive Kupffer cells.

氯膦酸盐 SUV PEG 脂质体

Liver of a mouse, 2 days after injection with clodronate-liposomes. Kupffer cells have been depleted

氯膦酸盐 SUV PEG 脂质体

Sections of mouse spleen stained for acid phosphatase Normal spleen with positive splenic macrophages

氯膦酸盐 SUV PEG 脂质体

Spleen of a mouse 2 days after injection with clodronate liposomes. Only few macrophages are left

氯膦酸盐 SUV PEG 脂质体

相关属性

储存温度 2-8°C储存
品牌 Jinpan

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

¥4,309.00

有货

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

品牌:Jinpan
CLODRONATE SUV PEG LIPOSOMES & CONTROL SUV PEG LIPOSOMES

MSDS

质检证书(CoA)

相似产品

货号 (SKU) 包装规格 是否现货 价格 数量
C419764-2×5ml 2×5ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  
C419764-2×10ml 2×10ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  
C419764-2×15ml 2×15ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  
C419764-2×20ml 2×20ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  
C419764-2×30ml 2×30ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  
C419764-2×40ml 2×40ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  
C419764-2×50ml 2×50ml 期货 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体  

基本信息

产品名称 氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体
英文名称 CLODRONATE SUV PEG LIPOSOMES & CONTROL SUV PEG LIPOSOMES
运输条件 冰袋运输

一般描述

产品组成

货号 CLODRONATE SUV PEG LIPOSOMES CONTROL SUV PEG LIPOSOMES
C419764-2×5ml C419508-5ml C419763-5ml
C419764-2×10ml C419508-10ml C419763-10ml
C419764-2×15ml C419508-15ml C419763-15ml
C419764-2×20ml C419508-20ml C419763-20ml
C419764-2×30ml C419508-30ml C419763-30ml
C419764-2×40ml C419508-40ml C419763-40ml
C419764-2×50ml C419508-50ml C419763-50ml


产品描述

氯膦酸钠SUV-PEG脂质体

人工球体由单个磷脂双层组成,包裹含有氯膦酸盐的PBS(磷酸盐缓冲盐水)水溶液。将含有脂质的特殊PEG添加到组合物中,允许血液中长时间循环,并减缓制剂的降解。脂质体悬浮液已挤出,直径为200纳米,储存时不会沉淀。悬浮液中氯膦酸盐的浓度约为5 mg/ml。

根据要求,可以通过额外的挤压步骤将尺寸减小到120-150nm。

对照SUV-PEG脂质体

对照脂质体不含氯膦酸盐。仅含PBS,可用于对照实验,以确定注射氯膦酸盐脂质体后观察到的效应是否完全是由于巨噬细胞耗竭所致。脂质体分散体是用一种特殊的含有脂质的PEG制备的,这种脂质可以在血液中长时间循环,减缓制剂的降解。该制剂已被挤出,直径为200nm,这使其成为氯膦酸钠SUV-PEG脂质体的首选对照品。

根据要求,可以通过额外的挤压步骤将尺寸减小到120-150nm。


储存和使用说明

给药前,先让脂质体达到室温,轻轻摇晃或搅拌混悬液。脂质体往往会在一段时间后沉淀,导致小瓶中分布不均匀。当注射时间过长时,脂质体甚至可能在注射器中沉淀。如果使用同一个注射器注射多只动物,这可能会导致剂量不同。

不鼓励稀释悬浮液,但如有必要,请使用 PBS 或盐水。

我们建议客户在发货后 16 周内使用我们的脂质体制剂。强烈建议不要在到期日之后使用。在这段时间之后,污染的风险会增加,并且可能会发生轻微的功能丧失。


作用机制

巨噬细胞在免疫和非免疫防御机制中发挥重要作用。它们构成了抵御细菌、病毒和其他形式的微生物污染侵入脊椎动物体内的第一道防线。巨噬细胞是大细胞,几乎存在于所有身体组织中,它们可以有不同的形式和名称(例如,枯否细胞、肺泡巨噬细胞、小胶质细胞、破骨细胞、红髓巨噬细胞)。巨噬细胞“清除”,它们摄取和消化所有可能是潜在病原体的外来物质、微生物、癌细胞和细胞碎片。这个过程称为吞噬作用。巨噬细胞进一步调节许多非吞噬细胞的功能,主要是通过介导可溶性分子如细胞因子和趋化因子。它们参与先天免疫。

脂质体是人工制备的球体,由同心磷脂双层组成。当磷脂分散在水中时,亲水性头部将构成脂质体的两个外部部分,而疏水性脂肪酸基团将构成内部部分(见图 1)。水性隔室将双层隔开,亲水性分子可以溶解在其中,从而产生脂质体包裹的分子。氯膦酸盐(二氯亚甲基二膦酸盐或 Cl2MBP)是一种亲水分子,可以封装在磷脂双层中。游离的氯膦酸盐不易穿过细胞膜,并被肾系统从循环中迅速清除(即在几分钟内)。然而,当包裹在脂质体中时,氯膦酸盐脂质体会被巨噬细胞摄取而无法逃脱(见图 2)。磷脂双分子层被溶酶体磷脂酶消化,而氯膦酸盐不被消化并保留在巨噬细胞中。巨噬细胞摄入的磷脂双分子层和脂质体越多,氯膦酸盐就会在巨噬细胞内积累越多。超过一定的细胞内浓度,氯膦酸盐将通过启动其程序性细胞死亡,即细胞凋亡来消除巨噬细胞。

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体
图 1. 氯膦酸盐脂质体的示意图。囊泡由同心磷脂双层组成,由水性隔室隔开。双层由亲水和疏水基团组成。氯膦酸盐(此处以黑色方块表示)溶解在水溶液中并封装在脂质体中。
氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体
图 2. 巨噬细胞摄取和消化氯膦酸盐脂质体的示意图。氯膦酸盐脂质体通过内吞作用被巨噬细胞摄取,然后与含有磷脂酶的溶酶体 (L) 融合(箭头)。磷脂酶破坏的磷脂双分子层越多,巨噬细胞内释放的氯膦酸盐(黑色方块)就越多。巨噬细胞最终通过凋亡被杀死。(N = 巨噬细胞核)。

因此,氯膦酸盐脂质体可用于通过消耗巨噬细胞来研究巨噬细胞的功能。例如,它们可以应用于各种自身免疫疾病、移植、神经系统疾病和基因治疗的模型。氯膦酸盐脂质体只有在可以达到的情况下才能消耗巨噬细胞。一些组织可以形成脂质体的屏障。通过选择氯膦酸盐脂质体的正确给药途径,可以耗尽特定器官或组织的巨噬细胞。
PBS 脂质体主要用于对照实验。然而,这些也可以通过饱和来阻止吞噬作用一段时间。因此,PBS 脂质体不代表正常健康、非阻塞、非抑制和非活化巨噬细胞的对照实验。当比较氯膦酸盐脂质体与 PBS 脂质体的效果时,效果可能低于预期。

PRODUCT COMPOSITION

货号 CLODRONATE SUV PEG LIPOSOMES CONTROL SUV PEG LIPOSOMES
C419764-2×5ml C419508-5ml C419763-5ml
C419764-2×10ml C419508-10ml C419763-10ml
C419764-2×15ml C419508-15ml C419763-15ml
C419764-2×20ml C419508-20ml C419763-20ml
C419764-2×30ml C419508-30ml C419763-30ml
C419764-2×40ml C419508-40ml C419763-40ml
C419764-2×50ml C419508-50ml C419763-50ml


DESCRIPTION

Clodronate SUV PEG Liposomes

Artificial spheres consisting of a single phospholipid bilayer encapsulating an aqueous PBS (phosphate buffered saline) solution containing clodronate. A special PEG-containing lipid is added to the composition, which allows for long circulation in blood and slower degradation of the formulation. The Liposomal suspension has been extruded and sized to 200nm in diameter and will not tend to precipitate upon storage. The concentration of clodronate in the suspension is ca. 5 mg/ml.

Upon request, the size can be reduced to 120-150nm with an extra extrusion step.

Control SUV PEG Liposomes

Control liposomes do not contain clodronate. Containing PBS only, they can be used for control experiments, in order to find out whether the effects observed after injection of clodronate liposomes are due to macrophage depletion exclusively. The Liposomal dispersion has been prepared with a special PEG-containing lipid which allows for long circulation in blood and slower degradation of the formulation. This formulation has been extruded and sized to 200nm in diameter which makes it the preferred control for the Clodronate SUV PEG liposomes.

Upon request, the size can be reduced to 120-150nm with an extra extrusion step.


STORAGE AND DIRECTIONS OF USE

Upon arrival, liposomes should be stored between 4 – 8 ºC (or 39 – 47 ºF). The liposomal suspensions should never be frozen, nor be exposed to extreme high temperatures. This can cause disturbances to the phospholipid bilayers, possibly leading to leakage of clodronate out of the liposome.

Before administration, let the liposomes reach room temperature first and gently shake or stir the suspension. Liposomes tend to precipitate after some time, causing an inhomogeneous distribution in the vial. When injection takes too much time, the liposomes may even precipitate in the syringe. If multiple animals are injected using the same syringe, this can cause differential dosing.

Dilution of the suspension is discouraged, but if necessary use PBS or saline.

We advise our customers to use our liposomal formulation within 16 weeks after shipment. Use after the expiry date has occurred is strongly discouraged. After this period the risk of contamination increases, and a slight loss of function could occur.

MECHANISM OF ACTION

Macrophages play an important role in immune and non-immune defence mechanisms. They form a first line of defence against bacterial, viral and other forms of microbiological contamination penetrating into the bodies of vertebrates. Macrophages are large cells, found in almost all bodily tissues where they can have varying forms and names (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages). Macrophages “scavenge”, they ingest and digest all foreign substances, microbes, cancer cells and cellular debris that might be potential pathogens. This process is called phagocytosis. Macrophages further regulate functions of many non-phagocytic cells, mainly through mediation of soluble molecules such as cytokines and chemokines. They are involved in innate immunity, adaptive immunity and can have (anti-) inflammatory effects.

Liposomes are artificially prepared spheres and consist of concentric phospholipid bilayers. When phospholipids are dispersed in water, the hydrophilic heads will make up both outer parts of the liposome, whereas the hydrophobic fatty acid groups will make up the inner part (see figure 1). Aqueous compartments separate the bilayers, and hydrophilic molecules can be dissolved in it, resulting in liposome-encapsulated molecules. Clodronate (dichloromethylene-bisphosphonate or Cl2MBP) is a hydrophilic molecule that can be encapsulated within phospholipid bilayers. Free clodronate does not easily cross cell membranes, and is rapidly cleared (i.e. within minutes) from circulation by the renal system. However, when entrapped in a liposome, the clodronate liposome is ingested by macrophages and cannot escape it (see figure 2). The phospholipid bilayers are digested by lysosomal phospholipases, whereas clodronate is not digested and remains in the macrophage. The more phospholipid bilayers and liposomes are ingested by the macrophage, the more clodronate will accumulate within the macrophage. Exceeding a certain intracellular concentration, clodronate will eliminate the macrophage by initiating its programmed cell death, i.e. apoptosis.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

Figure 1. Schematic representation of a clodronate liposome. The vesicle consists of concentric phospholipid bilayers, separated by aqueous compartments. The bilayers consist of a hydrophilic and hydrophobic group. Clodronate (represented here as black squares) are dissolved in the aqueous solution and encapsulated within the liposome.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

Figure 2. Schematic representation of clodronate liposome ingestion and digestion by a macrophage. Clodronate liposomes are ingested by the macrophages via endocytosis and then fused with the lysosomes (L) which contain phospholipases (arrowheads). The more phospholipid bilayers are disrupted by the phospholipases, the more clodronate (black squares) is released within the macrophage. Macrophages are ultimately killed through apoptosis. (N = nucleus of macrophage).

Thus, clodronate liposomes can be used to study macrophage functioning by depletion of macrophages. For instance, they can be applied in various models of autoimmune disease, transplantation, neurological disorders and gene therapy. Clodronate liposomes are only able to deplete macrophages if they can be reached. Some tissues can form barriers for the liposomes. By choosing the right administration route of clodronate liposomes, particular organs or tissues can be depleted of macrophages.

PBS liposomes are mostly used for control experiments. However, these too can block phagocytosis by saturation for certain periods of time. PBS liposomes thus do not represent a control experiment with normal healthy, non-blocked, non-suppressed and non-activated macrophages. When comparing effects of clodronate liposomes with PBS liposomes, the effects can therefore be less than expected.

ADMINISTRATION PROTOCOLS

Administration protocols should be chosen carefully and depend on several factors, for instance: the type of macrophage you intend to deplete (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages), the time in which you intend to maintain depletion (e.g. short or long term), the (animal) model, and other experimental factors. In vitro application of clodronate liposomes is possible, albeit that they are specifically suitable to study macrophages in vivo. Below you can see schematic representations of the tissues and macrophages that can be reached through different administration routes. Please note that not all tissues and routes are represented here.

Abbreviations: AL = lung alveoli, BM = bone marrow, BR = brain, BV = blood vessels / circulation, DA = draining area of lymph node, EY = eye, GU = gut / intestines, IV = intravenous delivery, KI = kidney, LI = liver, LN = lymph node, LU = lung, LV = lymph vessels, PE = peritoneal cavity, SP = spleen, SY = synovial cavity in joint, TE = testis, TR = trachea.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

In general, it is recommend to inject 100 µL of suspension / 10 grams of animal weight for intravenous injection. Raising the dosage considerably may lead to blockage of capillaries. Intravenous administration of clodronate liposomes will lead to maximum depletion of liver and spleen macrophages in ca. 24 hours. Dependent on the subset of macrophages they will remain depleted for ca. 5 days. After that time, new macrophages will replace the depleted ones: macrophage precursors, monocytes, that are formed in bone marrow and released in circulation will arrive at their destination and further differentiate into mature macrophages. Monocytes,macrophage precursors, can also be depleted. To prevent macrophage repopulation, multiple injections can be administered every 2-3 days to target monocytes. See for instance: Sunderkötter, C., Nikolic, T., Dillon, M. J., Van Rooijen, N., Stehling, M., Drevets, D. A., & Leenen, P. J. (2004). Subpopulations of mouse blood monocytes differ in maturation stage and inflammatory response. The Journal of Immunology, 172(7), 4410-4417.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

For intraperitoneal administration, the recommended injection dosis (i.e. 100 µL of suspension / 10 grams of animal weight) can be increased considerably. This route also depletes peritoneal macrophages, but will take longer to deplete macrophages in liver and spleen (ca. 3 days). Depletion is slower and more gradual, since the liposomes have to be carried from the peritoneal cavity to circulation by lymph flow via the thoracic duct, which is a passive form of transport.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

Local administration is often required to target macrophages that are difficult to reach, such as macrophages in testis or the phagocytic synovial lining cells.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

For depletion of alveolar macrophages, clodronate liposomes can be administered intranasally as well as intratracheally. The difference is that intranasal liposomes may be spoiled in the oesophagus if not administered properly, whereas intratracheal instillation will deliver all liposomes in the lung. Please note that these routes only target alveolar macrophages, and not interstitial macrophages. These can be targeted through depletion of blood monocytes in circulation. See for instance: Huang, L., Nazarova, E. V., Tan, S., Liu, Y., & Russell, D. G. (2018). Growth of Mycobacterium tuberculosis in vivo segregates with host macrophage metabolism and ontogeny. Journalof Experimental Medicine, 215(4), 1135-1152.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

For subcutaneous injection the maximum volume to be injected depends on the storage capacity of the injection site.

RESULTS

Sections of mouse liver, stained with monoclonal antibody F4/80 Normal liver with positive Kupffer cells.

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

Liver of a mouse, 2 days after injection with clodronate-liposomes. Kupffer cells have been depleted

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

Sections of mouse spleen stained for acid phosphatase Normal spleen with positive splenic macrophages

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

Spleen of a mouse 2 days after injection with clodronate liposomes. Only few macrophages are left

氯膦酸钠SUV-PEG脂质体与对照SUV-PEG脂质体

相关属性

储存温度 2-8°C储存
品牌 Jinpan

对照SUV-PEG脂质体

对照SUV-PEG脂质体

¥1,069.00

有货

对照SUV-PEG脂质体

品牌:Jinpan
CONTROL SUV PEG LIPOSOMES

MSDS

质检证书(CoA)

相似产品

货号 (SKU) 包装规格 是否现货 价格 数量
C419763-5ml 5ml 期货 对照SUV-PEG脂质体  
C419763-10ml 10ml 期货 对照SUV-PEG脂质体  
C419763-15ml 15ml 期货 对照SUV-PEG脂质体  
C419763-20ml 20ml 期货 对照SUV-PEG脂质体  
C419763-30ml 30ml 期货 对照SUV-PEG脂质体  
C419763-40ml 40ml 期货 对照SUV-PEG脂质体  
C419763-50ml 50ml 期货 对照SUV-PEG脂质体  

基本信息

产品名称 对照SUV-PEG脂质体
英文名称 CONTROL SUV PEG LIPOSOMES
运输条件 冰袋运输

一般描述

产品描述

对照SUV PEG脂质体:

对照脂质体不含氯膦酸盐。仅含PBS,可用于对照实验,以确定注射氯膦酸盐脂质体后观察到的效应是否完全是由于巨噬细胞耗竭所致。脂质体分散体是用一种特殊的含有脂质的PEG制备的,这种脂质可以在血液中长时间循环,减缓制剂的降解。该制剂已被挤出,直径为200nm,这使其成为氯膦酸钠SUV-PEG脂质体的首选对照品。

根据要求,可以通过额外的挤压步骤将尺寸减小到120-150nm。


储存和使用说明

给药前,先让脂质体达到室温,轻轻摇晃或搅拌混悬液。脂质体往往会在一段时间后沉淀,导致小瓶中分布不均匀。当注射时间过长时,脂质体甚至可能在注射器中沉淀。如果使用同一个注射器注射多只动物,这可能会导致剂量不同。

不鼓励稀释悬浮液,但如有必要,请使用 PBS 或盐水。

我们建议客户在发货后 16 周内使用我们的脂质体制剂。强烈建议不要在到期日之后使用。在这段时间之后,污染的风险会增加,并且可能会发生轻微的功能丧失。


作用机制

巨噬细胞在免疫和非免疫防御机制中发挥重要作用。它们构成了抵御细菌、病毒和其他形式的微生物污染侵入脊椎动物体内的第一道防线。巨噬细胞是大细胞,几乎存在于所有身体组织中,它们可以有不同的形式和名称(例如,枯否细胞、肺泡巨噬细胞、小胶质细胞、破骨细胞、红髓巨噬细胞)。巨噬细胞“清除”,它们摄取和消化所有可能是潜在病原体的外来物质、微生物、癌细胞和细胞碎片。这个过程称为吞噬作用。巨噬细胞进一步调节许多非吞噬细胞的功能,主要是通过介导可溶性分子如细胞因子和趋化因子。它们参与先天免疫。

脂质体是人工制备的球体,由同心磷脂双层组成。当磷脂分散在水中时,亲水性头部将构成脂质体的两个外部部分,而疏水性脂肪酸基团将构成内部部分(见图 1)。水性隔室将双层隔开,亲水性分子可以溶解在其中,从而产生脂质体包裹的分子。氯膦酸盐(二氯亚甲基二膦酸盐或 Cl2MBP)是一种亲水分子,可以封装在磷脂双层中。游离的氯膦酸盐不易穿过细胞膜,并被肾系统从循环中迅速清除(即在几分钟内)。然而,当包裹在脂质体中时,氯膦酸盐脂质体会被巨噬细胞摄取而无法逃脱(见图 2)。磷脂双分子层被溶酶体磷脂酶消化,而氯膦酸盐不被消化并保留在巨噬细胞中。巨噬细胞摄入的磷脂双分子层和脂质体越多,氯膦酸盐就会在巨噬细胞内积累越多。超过一定的细胞内浓度,氯膦酸盐将通过启动其程序性细胞死亡,即细胞凋亡来消除巨噬细胞。

对照SUV-PEG脂质体
图 1. 氯膦酸盐脂质体的示意图。囊泡由同心磷脂双层组成,由水性隔室隔开。双层由亲水和疏水基团组成。氯膦酸盐(此处以黑色方块表示)溶解在水溶液中并封装在脂质体中。
对照SUV-PEG脂质体
图 2. 巨噬细胞摄取和消化氯膦酸盐脂质体的示意图。氯膦酸盐脂质体通过内吞作用被巨噬细胞摄取,然后与含有磷脂酶的溶酶体 (L) 融合(箭头)。磷脂酶破坏的磷脂双分子层越多,巨噬细胞内释放的氯膦酸盐(黑色方块)就越多。巨噬细胞最终通过凋亡被杀死。(N = 巨噬细胞核)。

因此,氯膦酸盐脂质体可用于通过消耗巨噬细胞来研究巨噬细胞的功能。例如,它们可以应用于各种自身免疫疾病、移植、神经系统疾病和基因治疗的模型。氯膦酸盐脂质体只有在可以达到的情况下才能消耗巨噬细胞。一些组织可以形成脂质体的屏障。通过选择氯膦酸盐脂质体的正确给药途径,可以耗尽特定器官或组织的巨噬细胞。
PBS 脂质体主要用于对照实验。然而,这些也可以通过饱和来阻止吞噬作用一段时间。因此,PBS 脂质体不代表正常健康、非阻塞、非抑制和非活化巨噬细胞的对照实验。当比较氯膦酸盐脂质体与 PBS 脂质体的效果时,效果可能低于预期。

DESCRIPTION

CONTROL SUV PEG LIPOSOMES:

Control liposomes do not contain clodronate. Containing PBS only, they can be used for control experiments, in order to find out whether the effects observed after injection of clodronate liposomes are due to macrophage depletion exclusively. The Liposomal dispersion has been prepared with a special PEG-containing lipid which allows for long circulation in blood and slower degradation of the formulation. This formulation has been extruded and sized to 200nm in diameter which makes it the preferred control for the Clodronate SUV PEG liposomes.

Upon request, the size can be reduced to 120-150nm with an extra extrusion step.

STORAGE AND DIRECTIONS OF USE

Upon arrival, liposomes should be stored between 4 – 8 ºC (or 39 – 47 ºF). The liposomal suspensions should never be frozen, nor be exposed to extreme high temperatures. This can cause disturbances to the phospholipid bilayers, possibly leading to leakage of clodronate out of the liposome.

Before administration, let the liposomes reach room temperature first and gently shake or stir the suspension. Liposomes tend to precipitate after some time, causing an inhomogeneous distribution in the vial. When injection takes too much time, the liposomes may even precipitate in the syringe. If multiple animals are injected using the same syringe, this can cause differential dosing.

Dilution of the suspension is discouraged, but if necessary use PBS or saline.

We advise our customers to use our liposomal formulation within 16 weeks after shipment. Use after the expiry date has occurred is strongly discouraged. After this period the risk of contamination increases, and a slight loss of function could occur.

MECHANISM OF ACTION

Macrophages play an important role in immune and non-immune defence mechanisms. They form a first line of defence against bacterial, viral and other forms of microbiological contamination penetrating into the bodies of vertebrates. Macrophages are large cells, found in almost all bodily tissues where they can have varying forms and names (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages). Macrophages “scavenge”, they ingest and digest all foreign substances, microbes, cancer cells and cellular debris that might be potential pathogens. This process is called phagocytosis. Macrophages further regulate functions of many non-phagocytic cells, mainly through mediation of soluble molecules such as cytokines and chemokines. They are involved in innate immunity, adaptive immunity and can have (anti-) inflammatory effects.

Liposomes are artificially prepared spheres and consist of concentric phospholipid bilayers. When phospholipids are dispersed in water, the hydrophilic heads will make up both outer parts of the liposome, whereas the hydrophobic fatty acid groups will make up the inner part (see figure 1). Aqueous compartments separate the bilayers, and hydrophilic molecules can be dissolved in it, resulting in liposome-encapsulated molecules. Clodronate (dichloromethylene-bisphosphonate or Cl2MBP) is a hydrophilic molecule that can be encapsulated within phospholipid bilayers. Free clodronate does not easily cross cell membranes, and is rapidly cleared (i.e. within minutes) from circulation by the renal system. However, when entrapped in a liposome, the clodronate liposome is ingested by macrophages and cannot escape it (see figure 2). The phospholipid bilayers are digested by lysosomal phospholipases, whereas clodronate is not digested and remains in the macrophage. The more phospholipid bilayers and liposomes are ingested by the macrophage, the more clodronate will accumulate within the macrophage. Exceeding a certain intracellular concentration, clodronate will eliminate the macrophage by initiating its programmed cell death, i.e. apoptosis.

对照SUV-PEG脂质体

Figure 1. Schematic representation of a clodronate liposome. The vesicle consists of concentric phospholipid bilayers, separated by aqueous compartments. The bilayers consist of a hydrophilic and hydrophobic group. Clodronate (represented here as black squares) are dissolved in the aqueous solution and encapsulated within the liposome.

对照SUV-PEG脂质体

Figure 2. Schematic representation of clodronate liposome ingestion and digestion by a macrophage. Clodronate liposomes are ingested by the macrophages via endocytosis and then fused with the lysosomes (L) which contain phospholipases (arrowheads). The more phospholipid bilayers are disrupted by the phospholipases, the more clodronate (black squares) is released within the macrophage. Macrophages are ultimately killed through apoptosis. (N = nucleus of macrophage).

Thus, clodronate liposomes can be used to study macrophage functioning by depletion of macrophages. For instance, they can be applied in various models of autoimmune disease, transplantation, neurological disorders and gene therapy. Clodronate liposomes are only able to deplete macrophages if they can be reached. Some tissues can form barriers for the liposomes. By choosing the right administration route of clodronate liposomes, particular organs or tissues can be depleted of macrophages.

PBS liposomes are mostly used for control experiments. However, these too can block phagocytosis by saturation for certain periods of time. PBS liposomes thus do not represent a control experiment with normal healthy, non-blocked, non-suppressed and non-activated macrophages. When comparing effects of clodronate liposomes with PBS liposomes, the effects can therefore be less than expected.

ADMINISTRATION PROTOCOLS

Administration protocols should be chosen carefully and depend on several factors, for instance: the type of macrophage you intend to deplete (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages), the time in which you intend to maintain depletion (e.g. short or long term), the (animal) model, and other experimental factors. In vitro application of clodronate liposomes is possible, albeit that they are specifically suitable to study macrophages in vivo. Below you can see schematic representations of the tissues and macrophages that can be reached through different administration routes. Please note that not all tissues and routes are represented here.

Abbreviations: AL = lung alveoli, BM = bone marrow, BR = brain, BV = blood vessels / circulation, DA = draining area of lymph node, EY = eye, GU = gut / intestines, IV = intravenous delivery, KI = kidney, LI = liver, LN = lymph node, LU = lung, LV = lymph vessels, PE = peritoneal cavity, SP = spleen, SY = synovial cavity in joint, TE = testis, TR = trachea.

对照SUV-PEG脂质体

In general, it is recommend to inject 100 µL of suspension / 10 grams of animal weight for intravenous injection. Raising the dosage considerably may lead to blockage of capillaries. Intravenous administration of clodronate liposomes will lead to maximum depletion of liver and spleen macrophages in ca. 24 hours. Dependent on the subset of macrophages they will remain depleted for ca. 5 days. After that time, new macrophages will replace the depleted ones: macrophage precursors, monocytes, that are formed in bone marrow and released in circulation will arrive at their destination and further differentiate into mature macrophages. Monocytes,macrophage precursors, can also be depleted. To prevent macrophage repopulation, multiple injections can be administered every 2-3 days to target monocytes. See for instance: Sunderkötter, C., Nikolic, T., Dillon, M. J., Van Rooijen, N., Stehling, M., Drevets, D. A., & Leenen, P. J. (2004). Subpopulations of mouse blood monocytes differ in maturation stage and inflammatory response. The Journal of Immunology, 172(7), 4410-4417.

对照SUV-PEG脂质体

For intraperitoneal administration, the recommended injection dosis (i.e. 100 µL of suspension / 10 grams of animal weight) can be increased considerably. This route also depletes peritoneal macrophages, but will take longer to deplete macrophages in liver and spleen (ca. 3 days). Depletion is slower and more gradual, since the liposomes have to be carried from the peritoneal cavity to circulation by lymph flow via the thoracic duct, which is a passive form of transport.

对照SUV-PEG脂质体

Local administration is often required to target macrophages that are difficult to reach, such as macrophages in testis or the phagocytic synovial lining cells.

对照SUV-PEG脂质体

For depletion of alveolar macrophages, clodronate liposomes can be administered intranasally as well as intratracheally. The difference is that intranasal liposomes may be spoiled in the oesophagus if not administered properly, whereas intratracheal instillation will deliver all liposomes in the lung. Please note that these routes only target alveolar macrophages, and not interstitial macrophages. These can be targeted through depletion of blood monocytes in circulation. See for instance: Huang, L., Nazarova, E. V., Tan, S., Liu, Y., & Russell, D. G. (2018). Growth of Mycobacterium tuberculosis in vivo segregates with host macrophage metabolism and ontogeny. Journalof Experimental Medicine, 215(4), 1135-1152.

对照SUV-PEG脂质体

For subcutaneous injection the maximum volume to be injected depends on the storage capacity of the injection site.

RESULTS

Sections of mouse liver, stained with monoclonal antibody F4/80 Normal liver with positive Kupffer cells.

对照SUV-PEG脂质体

Liver of a mouse, 2 days after injection with clodronate-liposomes. Kupffer cells have been depleted

对照SUV-PEG脂质体

Sections of mouse spleen stained for acid phosphatase Normal spleen with positive splenic macrophages

对照SUV-PEG脂质体

Spleen of a mouse 2 days after injection with clodronate liposomes. Only few macrophages are left

对照SUV-PEG脂质体

相关属性

储存温度 2-8°C储存
品牌 Jinpan

氯膦酸钠SUV脂质体与对照SUV脂质体

氯膦酸钠SUV脂质体与对照SUV脂质体

有货

氯膦酸钠SUV脂质体与对照SUV脂质体

品牌:Jinpan
CLODRONATE SUV PEG LIPOSOMES

MSDS

质检证书(CoA)

相似产品

货号 (SKU) 包装规格 是否现货 价格 数量
C419761-2×5ml 2×5ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  
C419761-2×10ml 2×10ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  
C419761-2×15ml 2×15ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  
C419761-2×20ml 2×20ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  
C419761-2×30ml 2×30ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  
C419761-2×40ml 2×40ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  
C419761-2×50ml 2×50ml 期货 氯膦酸钠SUV脂质体与对照SUV脂质体  

基本信息

产品名称 氯膦酸钠SUV脂质体与对照SUV脂质体
英文名称 CLODRONATE SUV PEG LIPOSOMES
运输条件 冰袋运输

一般描述

产品组成

货号 CLODRONATE SUV LIPOSOMES CONTROL SUV LIPOSOMES
C419761-2×5ml C419455-5ml C419506-5ml
C419761-2×10ml C419455-10ml C419506-10ml
C419761-2×15ml C419455-15ml C419506-15ml
C419761-2×20ml C419455-20ml C419506-20ml
C419761-2×30ml C419455-30ml C419506-30ml
C419761-2×40ml C419455-40ml C419506-40ml
C419761-2×50ml C419455-50ml C419506-50ml


产品描述

氯膦酸钠SUV脂质体

人工球体由单个磷脂双层组成,包裹含有氯膦酸盐的PBS(磷酸盐缓冲盐水)水溶液。脂质体悬浮液已挤出,直径为200纳米,储存时不会沉淀。悬浮液中氯膦酸盐的浓度约为5 mg/ml。根据要求,可以通过额外的挤压步骤将尺寸减小到120-150nm。

对照SUV脂质体

对照脂质体不含氯膦酸盐。仅含PBS,可用于对照实验,以确定注射氯膦酸盐脂质体后观察到的效应是否完全是由于巨噬细胞耗竭。脂质体悬浮液已挤出,直径为200nm,这使其成为氯膦酸钠SUV脂质体的首选对照。

根据要求,可以通过额外的挤压步骤将尺寸减小到120-150nm。


储存和使用说明

给药前,先让脂质体达到室温,轻轻摇晃或搅拌混悬液。脂质体往往会在一段时间后沉淀,导致小瓶中分布不均匀。当注射时间过长时,脂质体甚至可能在注射器中沉淀。如果使用同一个注射器注射多只动物,这可能会导致剂量不同。

不鼓励稀释悬浮液,但如有必要,请使用 PBS 或盐水。

我们建议客户在发货后 16 周内使用我们的脂质体制剂。强烈建议不要在到期日之后使用。在这段时间之后,污染的风险会增加,并且可能会发生轻微的功能丧失。


作用机制

巨噬细胞在免疫和非免疫防御机制中发挥重要作用。它们构成了抵御细菌、病毒和其他形式的微生物污染侵入脊椎动物体内的第一道防线。巨噬细胞是大细胞,几乎存在于所有身体组织中,它们可以有不同的形式和名称(例如,枯否细胞、肺泡巨噬细胞、小胶质细胞、破骨细胞、红髓巨噬细胞)。巨噬细胞“清除”,它们摄取和消化所有可能是潜在病原体的外来物质、微生物、癌细胞和细胞碎片。这个过程称为吞噬作用。巨噬细胞进一步调节许多非吞噬细胞的功能,主要是通过介导可溶性分子如细胞因子和趋化因子。它们参与先天免疫。

脂质体是人工制备的球体,由同心磷脂双层组成。当磷脂分散在水中时,亲水性头部将构成脂质体的两个外部部分,而疏水性脂肪酸基团将构成内部部分(见图 1)。水性隔室将双层隔开,亲水性分子可以溶解在其中,从而产生脂质体包裹的分子。氯膦酸盐(二氯亚甲基二膦酸盐或 Cl2MBP)是一种亲水分子,可以封装在磷脂双层中。游离的氯膦酸盐不易穿过细胞膜,并被肾系统从循环中迅速清除(即在几分钟内)。然而,当包裹在脂质体中时,氯膦酸盐脂质体会被巨噬细胞摄取而无法逃脱(见图 2)。磷脂双分子层被溶酶体磷脂酶消化,而氯膦酸盐不被消化并保留在巨噬细胞中。巨噬细胞摄入的磷脂双分子层和脂质体越多,氯膦酸盐就会在巨噬细胞内积累越多。超过一定的细胞内浓度,氯膦酸盐将通过启动其程序性细胞死亡,即细胞凋亡来消除巨噬细胞。

氯膦酸钠SUV脂质体与对照SUV脂质体
图 1. 氯膦酸盐脂质体的示意图。囊泡由同心磷脂双层组成,由水性隔室隔开。双层由亲水和疏水基团组成。氯膦酸盐(此处以黑色方块表示)溶解在水溶液中并封装在脂质体中。
氯膦酸钠SUV脂质体与对照SUV脂质体
图 2. 巨噬细胞摄取和消化氯膦酸盐脂质体的示意图。氯膦酸盐脂质体通过内吞作用被巨噬细胞摄取,然后与含有磷脂酶的溶酶体 (L) 融合(箭头)。磷脂酶破坏的磷脂双分子层越多,巨噬细胞内释放的氯膦酸盐(黑色方块)就越多。巨噬细胞最终通过凋亡被杀死。(N = 巨噬细胞核)。

因此,氯膦酸盐脂质体可用于通过消耗巨噬细胞来研究巨噬细胞的功能。例如,它们可以应用于各种自身免疫疾病、移植、神经系统疾病和基因治疗的模型。氯膦酸盐脂质体只有在可以达到的情况下才能消耗巨噬细胞。一些组织可以形成脂质体的屏障。通过选择氯膦酸盐脂质体的正确给药途径,可以耗尽特定器官或组织的巨噬细胞。
PBS 脂质体主要用于对照实验。然而,这些也可以通过饱和来阻止吞噬作用一段时间。因此,PBS 脂质体不代表正常健康、非阻塞、非抑制和非活化巨噬细胞的对照实验。当比较氯膦酸盐脂质体与 PBS 脂质体的效果时,效果可能低于预期。

PRODUCT COMPOSITION

货号 CLODRONATE SUV LIPOSOMES CONTROL SUV LIPOSOMES
C419761-2×5ml C419455-5ml C419506-5ml
C419761-2×10ml C419455-10ml C419506-10ml
C419761-2×15ml C419455-15ml C419506-15ml
C419761-2×20ml C419455-20ml C419506-20ml
C419761-2×30ml C419455-30ml C419506-30ml
C419761-2×40ml C419455-40ml C419506-40ml
C419761-2×50ml C419455-50ml C419506-50ml


DESCRIPTION

Clodronate SUV Liposomes

Artificial spheres consisting of a single phospholipid bilayer encapsulating an aqueous PBS (phosphate buffered saline) solution containing clodronate. The Liposomal suspension has been extruded and sized to 200nm in diameter and will not tend to precipitate upon storage. The concentration of clodronate in the suspension is ca. 5 mg/ml.

Upon request, the size can be reduced to 120-150nm with an extra extrusion step.

Control SUV Liposomes

Control liposomes do not contain clodronate. Containing PBS only, they can be used for control experiments, in order to find out whether the effects observed after injection of clodronate liposomes are exclusively due to macrophage depletion. The Liposomal suspension has been extruded and sized to 200nm in diameter which makes it the preferred control for the Clodronate SUV liposomes.

Upon request, the size can be reduced to 120-150nm with an extra extrusion step.

STORAGE AND DIRECTIONS OF USE

Upon arrival, liposomes should be stored between 4 – 8 ºC (or 39 – 47 ºF). The liposomal suspensions should never be frozen, nor be exposed to extreme high temperatures. This can cause disturbances to the phospholipid bilayers, possibly leading to leakage of clodronate out of the liposome.

Before administration, let the liposomes reach room temperature first and gently shake or stir the suspension. Liposomes tend to precipitate after some time, causing an inhomogeneous distribution in the vial. When injection takes too much time, the liposomes may even precipitate in the syringe. If multiple animals are injected using the same syringe, this can cause differential dosing.

Dilution of the suspension is discouraged, but if necessary use PBS or saline.

We advise our customers to use our liposomal formulation within 16 weeks after shipment. Use after the expiry date has occurred is strongly discouraged. After this period the risk of contamination increases, and a slight loss of function could occur.

MECHANISM OF ACTION

Macrophages play an important role in immune and non-immune defence mechanisms. They form a first line of defence against bacterial, viral and other forms of microbiological contamination penetrating into the bodies of vertebrates. Macrophages are large cells, found in almost all bodily tissues where they can have varying forms and names (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages). Macrophages “scavenge”, they ingest and digest all foreign substances, microbes, cancer cells and cellular debris that might be potential pathogens. This process is called phagocytosis. Macrophages further regulate functions of many non-phagocytic cells, mainly through mediation of soluble molecules such as cytokines and chemokines. They are involved in innate immunity, adaptive immunity and can have (anti-) inflammatory effects.

Liposomes are artificially prepared spheres and consist of concentric phospholipid bilayers. When phospholipids are dispersed in water, the hydrophilic heads will make up both outer parts of the liposome, whereas the hydrophobic fatty acid groups will make up the inner part (see figure 1). Aqueous compartments separate the bilayers, and hydrophilic molecules can be dissolved in it, resulting in liposome-encapsulated molecules. Clodronate (dichloromethylene-bisphosphonate or Cl2MBP) is a hydrophilic molecule that can be encapsulated within phospholipid bilayers. Free clodronate does not easily cross cell membranes, and is rapidly cleared (i.e. within minutes) from circulation by the renal system. However, when entrapped in a liposome, the clodronate liposome is ingested by macrophages and cannot escape it (see figure 2). The phospholipid bilayers are digested by lysosomal phospholipases, whereas clodronate is not digested and remains in the macrophage. The more phospholipid bilayers and liposomes are ingested by the macrophage, the more clodronate will accumulate within the macrophage. Exceeding a certain intracellular concentration, clodronate will eliminate the macrophage by initiating its programmed cell death, i.e. apoptosis.

氯膦酸钠SUV脂质体与对照SUV脂质体

Figure 1. Schematic representation of a clodronate liposome. The vesicle consists of concentric phospholipid bilayers, separated by aqueous compartments. The bilayers consist of a hydrophilic and hydrophobic group. Clodronate (represented here as black squares) are dissolved in the aqueous solution and encapsulated within the liposome.

氯膦酸钠SUV脂质体与对照SUV脂质体

Figure 2. Schematic representation of clodronate liposome ingestion and digestion by a macrophage. Clodronate liposomes are ingested by the macrophages via endocytosis and then fused with the lysosomes (L) which contain phospholipases (arrowheads). The more phospholipid bilayers are disrupted by the phospholipases, the more clodronate (black squares) is released within the macrophage. Macrophages are ultimately killed through apoptosis. (N = nucleus of macrophage).

Thus, clodronate liposomes can be used to study macrophage functioning by depletion of macrophages. For instance, they can be applied in various models of autoimmune disease, transplantation, neurological disorders and gene therapy. Clodronate liposomes are only able to deplete macrophages if they can be reached. Some tissues can form barriers for the liposomes. By choosing the right administration route of clodronate liposomes, particular organs or tissues can be depleted of macrophages.

PBS liposomes are mostly used for control experiments. However, these too can block phagocytosis by saturation for certain periods of time. PBS liposomes thus do not represent a control experiment with normal healthy, non-blocked, non-suppressed and non-activated macrophages. When comparing effects of clodronate liposomes with PBS liposomes, the effects can therefore be less than expected.

ADMINISTRATION PROTOCOLS

Administration protocols should be chosen carefully and depend on several factors, for instance: the type of macrophage you intend to deplete (e.g. Kupffer cells, alveolar macrophages, microglia, osteoclasts, red pulp macrophages), the time in which you intend to maintain depletion (e.g. short or long term), the (animal) model, and other experimental factors. In vitro application of clodronate liposomes is possible, albeit that they are specifically suitable to study macrophages in vivo. Below you can see schematic representations of the tissues and macrophages that can be reached through different administration routes. Please note that not all tissues and routes are represented here.

Abbreviations: AL = lung alveoli, BM = bone marrow, BR = brain, BV = blood vessels / circulation, DA = draining area of lymph node, EY = eye, GU = gut / intestines, IV = intravenous delivery, KI = kidney, LI = liver, LN = lymph node, LU = lung, LV = lymph vessels, PE = peritoneal cavity, SP = spleen, SY = synovial cavity in joint, TE = testis, TR = trachea.

氯膦酸钠SUV脂质体与对照SUV脂质体

In general, it is recommend to inject 100 µL of suspension / 10 grams of animal weight for intravenous injection. Raising the dosage considerably may lead to blockage of capillaries. Intravenous administration of clodronate liposomes will lead to maximum depletion of liver and spleen macrophages in ca. 24 hours. Dependent on the subset of macrophages they will remain depleted for ca. 5 days. After that time, new macrophages will replace the depleted ones: macrophage precursors, monocytes, that are formed in bone marrow and released in circulation will arrive at their destination and further differentiate into mature macrophages. Monocytes,macrophage precursors, can also be depleted. To prevent macrophage repopulation, multiple injections can be administered every 2-3 days to target monocytes. See for instance: Sunderkötter, C., Nikolic, T., Dillon, M. J., Van Rooijen, N., Stehling, M., Drevets, D. A., & Leenen, P. J. (2004). Subpopulations of mouse blood monocytes differ in maturation stage and inflammatory response. The Journal of Immunology, 172(7), 4410-4417.

氯膦酸钠SUV脂质体与对照SUV脂质体

For intraperitoneal administration, the recommended injection dosis (i.e. 100 µL of suspension / 10 grams of animal weight) can be increased considerably. This route also depletes peritoneal macrophages, but will take longer to deplete macrophages in liver and spleen (ca. 3 days). Depletion is slower and more gradual, since the liposomes have to be carried from the peritoneal cavity to circulation by lymph flow via the thoracic duct, which is a passive form of transport.

氯膦酸钠SUV脂质体与对照SUV脂质体

Local administration is often required to target macrophages that are difficult to reach, such as macrophages in testis or the phagocytic synovial lining cells.

氯膦酸钠SUV脂质体与对照SUV脂质体

For depletion of alveolar macrophages, clodronate liposomes can be administered intranasally as well as intratracheally. The difference is that intranasal liposomes may be spoiled in the oesophagus if not administered properly, whereas intratracheal instillation will deliver all liposomes in the lung. Please note that these routes only target alveolar macrophages, and not interstitial macrophages. These can be targeted through depletion of blood monocytes in circulation. See for instance: Huang, L., Nazarova, E. V., Tan, S., Liu, Y., & Russell, D. G. (2018). Growth of Mycobacterium tuberculosis in vivo segregates with host macrophage metabolism and ontogeny. Journalof Experimental Medicine, 215(4), 1135-1152.

氯膦酸钠SUV脂质体与对照SUV脂质体

For subcutaneous injection the maximum volume to be injected depends on the storage capacity of the injection site.

RESULTS

Sections of mouse liver, stained with monoclonal antibody F4/80 Normal liver with positive Kupffer cells.

氯膦酸钠SUV脂质体与对照SUV脂质体

Liver of a mouse, 2 days after injection with clodronate-liposomes. Kupffer cells have been depleted

氯膦酸钠SUV脂质体与对照SUV脂质体

Sections of mouse spleen stained for acid phosphatase Normal spleen with positive splenic macrophages

氯膦酸钠SUV脂质体与对照SUV脂质体

Spleen of a mouse 2 days after injection with clodronate liposomes. Only few macrophages are left

氯膦酸钠SUV脂质体与对照SUV脂质体

相关属性

储存温度 2-8°C储存
品牌 Jinpan

和泰超纯水机Prima-S30UV

和泰超纯水机Prima-S30UV

  • 品牌 和泰|The Lab
  • 型号 Prima-S30UV
  • 商品详情

      高级别实验室用超纯水的卓越性价比之选,以自来水为水源,每小时产水量15~30升,电阻率达到18.2MΩ.cm,


        完全符合GB6682-2008、ASTM、CAP、CLSI、EP和USP制定的Ⅰ级水质的最高标准。


       标准配置 主机(含1套纯化柱)+内置12升压力水桶+附件包

    技术参数:

    名称

    基础型

    除热源型

    低有机物型

    综合型

    产品型号

    标准型

    Prima-S15

    Prima-S15UF

    Prima-S15UV

    Prima-S15UVF

    大流量型

    Prima-S30

    Prima-S30UF

    Prima-S30UV

    Prima-S30UVF

    进水要求*

    城市自来水:TDS<200 cm2="" tds="">200ppm时,建议选配外置软化器)

    系统流程**

    PF+KDF+AC+RO+
      DI+DI+TF

    PF+KDF+AC+RO+
      DI+DI+UF+TF

    PF+KDF+AC+RO+
      DI+UV+DI+TF

    PF+KDF+AC+RO+
      DI+UV+DI+UF+TF

    UP超纯水指标:

    电阻率

    18.2MΩ.cm@25℃

    重金属离子

    < 0.1 ppb

    总有机碳(TOC) ***

    <10 ppb

    <3 ppb

    细菌

    <0.1 cfu/ml

    热源(内毒素)

    N/A

    <0.001 Eu/ml

    N/A

    <0.001 Eu/ml

    颗粒物(>0.2μm)

    <1/ml

    核糖核酸酶(RNases)

    N/A

    <0.01 ng/ml

    N/A

    <0.01 ng/ml

    脱氧核糖核酸酶(DNases)

    N/A

    <4 pg/μl

    N/A

    <4 pg/μl

    DI去离子水指标:

    电阻率

    >5MΩ.cm

    RO反渗透水指标:

    离子截留率

    96%-99%(使用新RO膜时)

    有机物截留率

    >99%,当MW>200道尔顿

    颗粒和细菌截留率

    >99%

    产水量(25℃) ****

    S15:15升/小时;S30:30升/小时

    瞬间出水量

    2.0升/分钟(需配压力水桶),(加装UF机型流速会有降低)

    出水口(触摸按键)

    3个:RO反渗透水,DI去离子水,UP超纯水

    外形尺寸/重量

    长×宽×高:50×36×54cm/约25Kg

    电源/功率

    220V、50Hz/72W

     


  • 和超纯水机Prima-S15UV

    和超纯水机Prima-S15UV

  • 品牌 和泰|The Lab
  • 型号 Prima-S15UV
  • 商品详情

      高级别实验室用超纯水的卓越性价比之选,以自来水为水源,每小时产水量15~30升,电阻率达到18.2MΩ.cm,


        完全符合GB6682-2008、ASTM、CAP、CLSI、EP和USP制定的Ⅰ级水质的最高标准。


     

             

             标准配置 主机(含1套纯化柱)+内置12升压力水桶+附件包



     

     

    名称 基础型 除热源型 低有机物型 综合型
    产品型号 标准型 Prima-S15 Prima-S15UF Prima-S15UV Prima-S15UVF
    大流量型 Prima-S30 Prima-S30UF Prima-S30UV Prima-S30UVF
    进水要求* 城市自来水:TDS<200 ppm,5-45℃,1.0-4.0Kgf/cm2 (进水TDS>200ppm时,建议选配外置软化器)
    系统流程** PF+KDF+AC+RO+
    DI+DI+TF
    PF+KDF+AC+RO+
    DI+DI+UF+TF
    PF+KDF+AC+RO+
    DI+UV+DI+TF
    PF+KDF+AC+RO+
    DI+UV+DI+UF+TF
    UP超纯水指标:
    电阻率 18.2MΩ.cm@25℃
    重金属离子 < 0.1 ppb
    总有机碳(TOC) *** <10 ppb <3 ppb
    细菌 <0.1 cfu/ml
    热源(内毒素) N/A <0.001 Eu/ml N/A <0.001 Eu/ml
    颗粒物(>0.2μm) <1/ml
    核糖核酸酶(RNases) N/A <0.01 ng/ml N/A <0.01 ng/ml
    脱氧核糖核酸酶(DNases) N/A <4 pg/μl N/A <4 pg/μl
    DI去离子水指标:
    电阻率 >5MΩ.cm
    RO反渗透水指标:
    离子截留率 96%-99%(使用新RO膜时)
    有机物截留率 >99%,当MW>200道尔顿
    颗粒和细菌截留率 >99%
    产水量(25℃) **** S15:15升/小时;S30:30升/小时
    瞬间出水量 2.0升/分钟(需配压力水桶),(加装UF机型流速会有降低)
    出水口(触摸按键) 3个:RO反渗透水,DI去离子水,UP超纯水
    外形尺寸/重量 长×宽×高:50×36×54cm/约25Kg
    电源/功率 220V、50Hz/72W

  • 和泰超纯水机Edi-S10UV

    和泰超纯水机Edi-S10UV

  • 品牌 和泰|The Lab
  • 型号 Edi-S10UV
  • 商品详情

     ■ 采用Lonpure EDI技术及模块,以最优化的运行成本为您提供始终如一的M5Ωcm(25℃)以上,

     TOC<30ppb的Ⅱ级吨水,每天最大纯水产量可达240升,完全符合GB6682-2008、ASTM、CAP、

     CLSI、EP和USP制定的Ⅰ级水质的最高标准。

    标准配置 主机( 含1 套纯化柱)+20升水箱+ 附件包

    技术参数:

    名称

    基础型

    除热源型

    低有机物型

    综合型

    产品型号

    Edi-S10

    Edi-S10UF

    Edi-S10UV

    Edi-S10UVF

    进水要求*

    城市自来水:TDS<200 ppm,5-45℃,1.0-4.0Kgf/cm2 (   进水TDS>200ppm 时,建议选配外置软化器)

    系统流程**

    PF+KDF+AC+RO+SF+
      EDI+DI+TF

    PF+KDF+AC+RO+SF+
      EDI+DI+UF+TF

    PF+KDF+AC+RO+SF+
      EDI+UV+DI+TF

    PF+KDF+AC+RO+SF+
      EDI+UV+DI+UF+TF

    UP 超纯水指标:

    电阻率

    18.2MΩ.cm@25℃

    重金属离子

    < 0.1 ppb

    总有机碳(TOC) ***

    <10 ppb

    <3 ppb

    细菌

    <0.1 cfu/ml

    热源( 内毒素)

    N/A

    <1/ml

    N/A

    <1/ml

    颗粒物(>0.2μm)

    <1/ml

    核糖核酸酶(RNases)

    N/A

    <0.01 ng/ml

    N/A

    <0.01 ng/ml

    脱氧核糖核酸酶(DNases)

    N/A

    <4 pg/μl

    N/A

    <4 pg/μl

    EDI 去离子水指标:

    电阻率***

    >5MΩ.cm

    总有机碳(TOC)***

    >99%,当MW>200 道尔顿

    硅截留率

    >99.9%

    产水量(25℃) ****

    10 升/ 小时

    RO 瞬间出水量

    2.0 升/ 分钟( 需配压力水桶)

    出水口( 触摸按键)

    2 个:EDI 去离子水,UP 超纯水

    外形尺寸/ 重量

    长× 宽× 高:50×36×54cm/ 约30Kg

    电源/ 功率

    220V、50Hz/72W

     


  • 超纯水机Eco-S30UV/Eco-S30UF/Eco-S30UVF

    【简单介绍】

    品牌 金畔 产地 国产
    水源 市政

    超纯水机Eco-S30UV/Eco-S30UF/Eco-S30UVF:以自来水为水源,方便快速的制造超纯水,每小时产水量15-30升,电阻率达到18.2MΩ.cm,完全符合GB/T6682-2008、GB/T33087-2016、ASTM、CAP、CLSI、EP和USP制定的Ⅰ级水质标准。高级别实验室用超纯水的性价比之选。

    【详细说明】

    超纯水机Eco-S30UV/Eco-S30UF/Eco-S30UVF 

    产品简述:

       高级别实验室用超纯水的性价比之选,以自来水为水源,方便快速的制造超纯水,每小时产水量15-30升,电阻率达到18.2MΩ.cm,完全符合GB/T6682-2008、GB/T33087-2016、ASTM、CAP、CLSI、EP和USP制定的Ⅰ级水质标准。

    主要特点:

    全自动微电脑控制系统

    • 背光式LCD液晶屏(分辨率:128×64,尺寸:66×33mm).
    • 多级菜单式操作,全程实时动画式工作模式显示.

    系统内置水箱

    全自动 RO 膜防垢冲洗功能,RO 膜全自动冲洗(2 小时间隔冲洗)及手动强制冲洗程序,延长 RO 膜使用寿命

    • 模块化设计,预处理、RO 及后续纯化单元均为独立结构,系统维护、滤芯更换更加便捷
    • 管路、接头均获 NSF 认证,大限度地降低系统的 TOC 析出,确保纯水品质
    • 强劲的预处理组件,结合了 5μm PP 透明滤芯、KDF 复合滤芯、椰壳水洗级精密活性炭滤芯,有效保护 RO膜
    • 超长寿命复合KDF预处理纯化柱,可实现1年不用更换,运行成本降低
    • 双波长(185nm&254nm)UV紫外灯组件(进口灯管),有效杀菌,降低TOC,增强系统适用范围
    • MWCO5000DUF超滤组件(进口),有效去除热原(内毒素),可用于精密的细胞培养和IVF
    • (0.45+0.1)μm进口PES聚醚砜复合滤膜终端除菌过滤器,保证终端出水无菌

    超纯水机Eco-S30UV/Eco-S30UF/Eco-S30UVF

    主要参数

    名称 基础型 除热原型 低有机物型 综合型
    产品型号 Eco-S15/30 Eco-S15/30UF Eco-S15/30UV Eco-S15/30UVF
    纯水产量* 15 L/Hour 30 L/Hour
    超纯水产量 高达2.0L/Min(水箱有水时)
    UP超纯水指标  
    电阻率(25℃) 18.2MΩ.cm@25℃
    重金属离子 < 0.01 ppb
    有机碳(TOC) * <10 ppb <3 ppb
    细菌 <0.01 cfu/ml
    热原(内毒素) N/A <0.001 Eu/ml N/A <0.001 Eu/ml
    颗粒物(>0.1μm) <1/ml
    核糖核酸酶(RNases) N/A <1pg/ml N/A <1pg/ml
    脱氧核糖核酸酶(DNases) N/A <5pg/ml N/A <5pg/ml
    RO反渗透水指标  
    离子截留率 97%-99%(使用新RO膜时)
    有机物截留率 >99%,当MW>200道尔顿
    颗粒和细菌截留率 >99%
    原水要求 城市饮用自来水,水温5-45℃,水压1.0-4.0Kgf/cm2
    尺寸和重量 长×宽×高: 340×500×560mm;重量: 约25Kg
    电气要求 220V,50Hz
    功率 72W
    系统配置 主机(含1套纯化柱)+内置12升压力水桶+附件包

    耗材信息

    货号/型号 品名 使用寿命/根(估值)
    PC-M-PP 5μmPP深层滤芯 约2-6个月
    PC-M-KDF KDF复合滤芯 约1年
    PC-M-AC-G 精密活性炭滤芯 约6个月
    RO-100GPD 100GPDRO膜 约1-2年
    RO-200GPD 200GPDRO膜 约1-2年
    PTC-AC-HZB1 有机物纯化柱 约9000升纯水
    PTC-MBR-M 去离子纯化柱(进口树脂) 约1000升纯水/柱
    PTC-MBR-M4 4柱式去离子纯化柱(进口树脂) 约4000升纯水/组,由4根单体去离子纯化柱组成
    PTC-UPPR-M 超纯化柱(进口树脂) 约1000升纯水/柱
    PTC-UPPR-M4 4柱式超纯化柱(进口树脂) 约4000升纯水/组,由4根单体超纯化柱组成
    TF-(0.45+0.1)μm-S (0.45+0.1)μm进口PES终端滤器
    UF-5000D MWCO5000DUF超滤组件(进口)
    UV-(185nm&254nm)-10W-M 双波长(185nm&254nm)UV紫外灯组件(进口)
    LAMP-(185nm&254nm)-10W-M 双波长(185&254nm)紫外灯管(进口) 约9000小时
    UV-254-10W-M 254nmUV紫外灯组件(进口灯管)
    LAMP-254-10W-M 254nm紫外灯管(进口) 约9000小时